Amigurumi Doll

Amigurumi Scuba Diver Doll Free Crochet Pattern

Welcome to our website where you can find the most beautiful and highest quality samples of Amigurumi patterns. All the amigurumi patterns you can’t find are available on our website. Every day we continue to share new amigurumi patterns for you. Stay tuned to reach these amigurumi patterns before anyone else


Abbreviations:

SC – single crochet

İNC – increase

DEC – decrease

CH – chain

HOW I KNITTED A SCUBA DIVER …

Materials:

Threads COCO VITA cotton beige for body and black – for swimming trunks,

black and blue – for a vest.

Hook 1.25

Filler.

Wire for the frame, I have a copper D-1.2 mm.

HANDS.

Knit with a beige thread COCO VITA cotton. Hands decided

make with fingers. She made fingers on a wire frame.

Decided on the size of the fingers, based on the future size of the figure

(presumably 21-22 cm). I take a piece of foam and insert

small cloves. I wrap carnations with wire for beadwork.

I start with the thumb. Flatten the wire and the needle

I apply Crystal Moment glue. Wrap with thread with glue

evenly and with tension. Reaching the top, I shape with my finger

the top of the head. If necessary, then add more glue with a needle. The glue dries quickly and

it is possible to form the crown at one time. Then lower

I lightly smear part of the finger with glue and wind it back down.

Then I move on to the next finger. Leave the long tips

threads. Due to the fact that the carnations are fixed, fingers on both

hands are the same. The photo shows that the carnations are “walking”,

Now I put cardboard on the foam (for children’s creativity), then everything

also.

These fingers are made for another toy. I think the principle is clear.

Cut the wire for the handle frame (15 cm.), Do it at the end

loop and place it in the palm of your hand. With a needle and left

the tip of the thread fasten the loop in the palm of your hand. We connect the wire to

beadwork with wire frame and the same thread with glue,

again wrapping, fasten together. Extra thin wire

cut off. Such compounds are suggested to be made using

paper tape or adhesive tape. I use thread and glue Moment

Crystal. It turns out neatly and reliably.

The idea is spied on the Internet. Thanks to the master!

Uhhh! Really coped with this stage? I understand everything. But as

You?

We make the pens further.

1 row: we collect a chain of 8 ch, we connect the face. When typing, leave

the long tip of the thread, which subsequently connect the knitting between

fingers.

2 row: 8 sc.

3 row: 7 sc., Inc. (9 sc.)

4 row: 8 sc. (do not tie one column), transfer the marker.

5 row: we put our “little hand” on the palm of our hand and tie the thumb around,

skipping at the same time our unbounded column from the 9th row (it turns out

hole for the thumb), knit 8 sc.

All the fingers in our places. Then we knit around the wire

frame.

6 row: 8 sc.

7 row: dec., 2 sc., Dec., 2 sc. (6 sc.)

8-9 rows: 6 sc.

10 row: 3 sc., Inc., 2 sc. (7 sc.)

11 row: 6 sc., Inc. (8 sc.)

12-14 rows: 8 sc.

15 row: dec., 2 sc., 2 inc., 2 sc. (9 sc.)

16 row: 3 sc., 2 dec., 2 sc. (7 sc.)

17 row: sc., Inc., 6 sc. (8 sc.)

18-20 rows: 8 sc.

21 row: inc., 7 sc., (9 sc.)

22-23 rows: 9 sc.

Fill with filler as you knit.

Finish knitting, fasten and cut the thread. On the palm of your hand FLO

connect our knitting between the fingers. Similarly, tie the second

arm, but additionally tie 4 sc. to get the right and left

pens.

STOP, FEET. (2 parts).

We start knitting with a beige thread COCO VITA cotton.

1 row: 11 ch., With the second ch. from the hook we knit the 2nd row.

2 row: 9 sc., 3 sc. in one loop, on the other side of the chain 8 sc ,, inc.

(22 sc.)

3 row: 10 sc., Inc., 10 sc., Inc. (24 sc.)

4 row: 4 sc., Dec., (Sc., Dec.) X4, 6 sc. (19 sc.)

5 row: 2 sc., Dec., (Sc., Dec.) X4, 3 sc. (14 sc.)

6 row: 3 sc., Dec., (Sc., Dec.) X2, 3 sc. (11 sc.)

7 row: 3 sc., Dec., Sc., Dec., 3 sc. (9 sc.)

8-15 rows: 9 sc.

16 row: 8 sc., Inc. (10 sc.) Marker strictly centered at the back !!!

17 row: 10 sc.

18 row: 9 sc., Inc. (11 sc.)

19 row: 11 sc.

20 row: 9 sc., Inc., Sc. (12 sc.)

21 row: 12 sc.

22 row: 9 sc., Dec., Sc. (11 sc.)

23 row: 11 sc.

24 row: 9 sc., Dec. (10 sc.)

25 row: 10 sc.

26 row: 3 sc., Inc. 2 times, 3 sc., Dec. (11 sc.)

27 row: 3 sc., Dec. 2 times, 4 sc. (9 sc.)

28 row: 9 sc.

29 row: 8 sc., Inc. (10 sc.)

30 row: 10 sc. Marker in the center !!! If necessary, we knit loops

displacement.

31 row: 8 sc., Inc., Sc. (11 sc.)

32 row: 11 sc.

33 row: 8 sc., Inc., 2 sc. (12 sc.)

35 row: 9 sc., Inc., 2 sc. (13 sc.)

36 row: 13 sc.

37 row: 10 sc., Inc., 2 sc. (14 sc.)

38 row: 14 sc.

39 row: 11 sc., Inc., 2 sc. (15 sc.)

40 row: 15 sc.

41 row: 12 sc., Inc., 2 sc. (16 sc.)

42-44 rows: 16 sc. Change of thread to black (swimming trunks).

45-46 rows: 16 sc. (in black)

Fill with filler as you knit.

BODY.

We knit the first six rows in black (swimming trunks), then

change to beige. Until the 60th row, we knit according to MK, then my changes.

47 row: Join the legs and knit sc. (further it is not taken into account and is not

tied up). We knit 15 sc. on the first leg and 15 sc. on the second leg. (thirty

sc.) Marker in the center of the priests.

48-51 rows: 30 sc.

52 row: (3 sc., Dec.) X6 (24 sc.) Change the color to beige.

53-57 rows: 24 sc.

58 row: 6 sc., Inc., 12 sc., Inc., 4 sc. (26 sc.)

59 row: 26 sc. Insert the wireframe.

I cut two pieces of wire 25 cm each, make loops for the foot

and put in the legs. Subsequently, in the chest area I twist well. This

twisted wire will pass through the neck to the head. It will be to her

hands frame attached.

60 row: 7 sc., Inc., 12 sc., Inc., 5 sc. (28 sc.)

Next up are my changes.

61-62 rows: 28 sc.

63 row: 8 sc., Inc., 13 sc., Inc., 5 sc. (30 sc.)

64-66 rows: 30 sc.

67 row: 9 sc., Inc., 13 sc., Inc., 6 sc. (32 sc.)

We knit hands. We determine the connection from the armpit.

If necessary, we knit displacement loops. Do not forget to identify

right and left hands. The marker is centered on the back.

68 row: 8 sc. on the back, (4 sc., dec., 3 sc.) on the left hand, (3 sc., dec., 6

sc., dec., 3 sc.) on the chest, (3 sc., dec., 4 sc.) on the right hand, 8 sc. on the back.

(46 sc.)

At this stage, we finally form the doll’s frame. Wire

bend the arm frame with the letter “P”. The first vertical is the arm, the second is the shoulder,

cut the third to the desired size and connect it to the body frame. We have

it turns out two wires from two hands and twisted wire of the body frame.

We fix all this with a thread and glue Moment Crystal or any

another way.

Now you can tightly fill the filler.

69 row: (3 sc., Dec., 3 sc.) X2, 14 sc., (3 sc., Dec., 3 sc.) X2 (42 sc.)

70 row: 7 sc., 3 sc., Dec., 2 sc., 3 sc., Dec., 4 sc., Dec., 3 sc., 2 sc., Dec., 3

sc., 7 sc. (38 sc.) Marche is strictly in the middle of the back!

71 row: 4 sc., Skip 10 columns, 10 sc., Skip 10 columns, 4

sc. (18 sc) Shoulders will be formed from the missing loops.

72 row: (sc., Dec.) X6 (12 sc)

73-76 rows: 12 sc.

77 row: 12 sc. Flo

78 row: (sc., Inc.) X6 FLO (18 sc.)

79 row: (2 sc., Inc.) X6 (24 sc.)

80 row: (3 sc., Inc.) X6 (30 sc.)

81 row: (4 sc., Inc.) X6 (36 sc.)

82-91 rows: 36 sc.

Tightly fill with filler as you knit. On the frame inside

heads make a loop, cut off excess.

93 row: (4 sc., Dec.) X6 (30 sc.)

94 row: (3 sc., Dec.) X6 (24 sc.)

95 row: (2 sc., Dec.) X6 (18 sc.)

96 row: (sc., Dec.) X6 (12 sc.)

97 row: (sc., Dec.) X4 (8 sc.) Pull the crown over the front half loops with 8

single crochet. Finish knitting.

Through the holes on the shoulders, finally fill with filler.

Sew shoulder seams behind the front half loops. Fasten and cut the thread.

It turned out like this:

EARS (2 parts). Knit the ears. Sew after it will be

ready mask for scuba diving.

1 row: 6 sc. into magic ring amirurumi ring, lifting air loop. To turn

knitting without closing a row.

2 row: (inc., Sc.) X3 (9 sc.) Finish knitting, leave the thread for

sewing on.

The second stage is ready !!!

Diving equipment for scuba diver (growth

figures 21 cm.)

All design ideas are taken from MK “Fun and Fabulous Free

projects for children, Misl-st Julep, from yarnjulepsontheveranda.com. ”on

English language. I didn’t succeed with the translation, I knitted “according to the picture”. Here

these pictures. Maybe someone will come in handy.

Now the fun part is the technical part!

VEST (buoyancy compensator). The thread of gold and blue COCO VITA cotton, hook 1.25. We knit in rotary rows.

We start knitting with a golden thread.

1 row: 41 ch, from the second loop from the hook we knit the second row.

2-5 row: 40sc. Change the color of the thread to blue.

6.7 rows: 40sc. Change the color of the thread on the gold.

8 row: 40sc.

9 row: 8 sc., 12 ch., Skip 5 sc., 14 sc., 12 ch., Skip 5 sc., 8

sc. (40 sc. + 24 ch.)

10 row: 64 sc. Finish knitting, cut the thread.

To tie, fasten the blue thread in a convenient place (for me – on

mid back). At the same time, leave a long tip of the thread so that there is enough

to the end of the row.

1 row: tie the vest along the contour with columns without a crochet while tying

and the long tip of the thread that we left.

2 row: tie crochet posts with connecting posts.

Now, with a thread tied, we tighten our product a little, in the upper

parts are smaller, mostly on the bottom. This will give the vest volume.

We try on, fix the thread and cut it. My vest is removed, sewn

small pieces of Velcro. But you can stitch it during assembly. The vest is ready!

Flippers: Used threads of blue and blue Vita IRIS,

hook 1.0. We start knitting with gold. We knit in rotary rows.

1 row: dial a chain of 10 loops, the second from the hook loop inc

sc, 8 sc, inc, lift air loop (ch) (12 sc)

2 row: 12 sc., Ch.

3 row: inc., 10 sc, inc, ch. (14 sc)

4-9 rows: 14 sc., Ch.

10 row: dec., 10 sc, dec., Ch. (12 sc)

11-15 rows: 12 sc., Ch.

16 row: dec., 8 sc, dec., Ch. (10 sc)

17-20 rows: 10 sc., Ch.

21 row: dec., 6 sc, dec., Ch. (8 sc)

22-25 rows: 8 sc., Ch.

26 row: dec., 4 sc, dec., Ch. (6 sc)

27-30 rows: 6 sc., Ch.

31 row: tie along the contour sc., Tying the wire while leaving

long tails on both sides for future use. I have

wire for bead weaving 0.4 mm in two additions.

32 row: sc. 31st row to tie with connecting posts.

Next, change the color to blue and knit in circular rows.

33 row: 2 sc. into the loop of the harness, 6 sc. behind the front wall of the loops of the 30th row,

2 sc. into the strapping loop on the other hand, 6 sc. for the remaining half loop.

(16 sc)

34 row: 16 sc.

35 row: inc., 7 sc., Inc., 7 sc. (18 sc)

36 row: inc., 8 sc., Inc., 8 sc. (20 sc)

37-39 rows: 20 sc.

40 row: 13 sc., Ch. Then we knit in rotary rows. Start and

the end of the row should be located symmetrically on both sides of the fins.

The wire has been inside the knitting all this time and has not yet been tied.

41-44 rows: 13 sc., Ch.

45 row: 5 sc., 3 loops together, 5 sc., Ch. (11 sc)

46 row: 4 sc., 3 loops together, 4 sc., Ch. (9 sc)

47 row: 3 sc., 3 loops together, 3 sc. (7 sc)

We form a heel and start strapping. Connecting column

connect the opposite ends of knitting. The hook is in the middle

heels. We wrap the wire so that we get a full circle with one

sides and exactly the same on the other. Tie the edge of the flippers boot,

capturing the wire. It turns out 4 procrastination (originally in my 2

additions, then they overlap one another).

48 row: sc, how many – did not count.

49 row: tie with connecting posts, fix the thread and cut.

Cut off excess wire.

It turned out like this. Well, very pretty !!!

BALLOON. Used threads of yellow Vita IRIS and gray Kirov

iris of flowers, hook 1.0. We start knitting with yellow circular

in rows.

1 row: 6 sc into magic ring.

2 row: 6 inc. sc. (12 sc)

3 row: (sc., Inc.) X6 (18 sc)

4 row: (2 sc., Inc.) X6 (24 sc)

5 row: (3 sc., Inc.) X6 (30 sc)

6-27 rows: 30 sc.

28 row: (13 sc., Dec.) X2 (28 sc)

29 row: (5 sc., Dec.) X4 (24 sc)

30 row: (4 sc., Dec.) X4 (20 sc)

31 row: (3 sc., Dec.) X4 (16 sc)

32 row: (2 sc., Dec.) X4 (12 sc)

33-35 rows: 12 sc. Change the color to gray.

36-38 rows: 12 sc. Finish knitting, leave thread to fasten

rebar and trim.

Fill tightly with filler as you knit. At the top

fill not up to the end, leave room for our fittings.

FITTINGS. We prepare the fittings (I do not know what word can

name these details). I cut three pieces of cambric 15 cm each. (These are

small points with a diameter of 1.6 mm, bought in the store “Batteries”, something for

installation of radio circuits). And three pieces of 1.2 mm copper wire.

20 cm each. For nagdecnikov made small round loops, and for the remote

– long oblong. Prepared a stud for attaching the head to

to the head.

I inserted the wire into the rods, the carnations into one of the loops. For

Reliability lubricated the wire with glue Crystal Moment before the loop on

2-3 cm

NAGDECNIK (breathing machine). We knit two thread holders blue and blue (one working, another spare) Vita IRIS, hook

1.0. Knit in circular rows.

1 row: 6 sc. into magic ring.

2 row: 6 inc. sc. (12 sc)

3 row: (sc., Inc.) X6 (18 sc)

4-5 rows: 18 sc.

6 row: 5 sc., Air loop, skip one loop, mark with a marker,

not to lose, 12 sc. (17 sc. And 1 ch)

7 row: 18 sc.

8 row: (sc., Dec.) X6 (12 sc)

At this stage, we “roll” the ball from the filler well, put it in

our knitting. Then we insert the reinforcement with the stud into the hole in the 6th row.

Next we tie the carnations. In the version without cloves, we simply knit further.

9 row: 6 dec. sc. (6 sc)

10 row: 6 sc.

11 row: 6 inc. (12 sc)

12 row: (sc., Inc.) X6 (18 sc)

13 row: tie with connecting posts, fasten the thread and cut.

PULTIK. On the remote there is an incor for measuring pressure in

cylinder and glade meter. Knit with a gray thread, Kirov iris, hook

1.0. Knit in circular rows.

1 row: 6 sc. into magic ring.

2 row: 6 inc. sc. (12 sc)

3-11 rows: 12 sc.

At this stage, insert our oblong eyelet and in advance

prepared template from dense material (I use packaging from

cotton buds). Lightly fill with filler on the side of the loop to

the opposite side was smooth. There we will stick our

incor.

12 row: 6 dec. sc.

13-14 rows: 6 sc.

Fasten and cut the thread, leaving a small tail. With help

glue and this tail additionally strengthen our design.

Here are the details:

On a stick glued with glue the Moment Crystal incor. Used

pendants purchased at a needlework store. I cut the excess with nippers and

done!

With the help of thread and glue, I connected three parts, the extra wire

cut off. The design was greased with glue and inserted into the container. Additionally

strengthened the junction. Tied a strap for attaching to the yolk.

It turned out like this!

MASK. Prepared a template for the mask. I tried on the finished

head figures. I cut out the glass from transparent plastic.

I inserted the wire into the wire and bent according to the template.

I cut the excess, leaving a small tip of the wire.

Connected opposite sides.

Tied with a white thread COCO VITA cotton, hook 1.25.

1 row: sc – how much will turn out.

2 row: sc waiting for sc of the 1st row.

Tied and sewn a strap (just tied a chain of ch from two

parties). Pasted “glass”. The result is such a set.

After the assembly, it turned out like this:

Outlined the location of the eyes, ears, hair line:

I embroidered eyes, a mouth, a nose. A hole is visible under the mouth

the clasp of the decal will be inserted. Sewed ears. I did a hairstyle

sewn hair with monofilament according to the video MK provided by Yuniya

Filonova.

LOAD BELT. Knitted with dark thread COCO VITA cotton,

hook 1.25. Knit in circular rows.

1 row: 51 ch., From the second loop we knit the second row.

2 row: 49 sc., 3 sc. in the last loop, 49 sc. on the second side of the chain,

ch., sl-st. ch.

3 row: 49 sc., 3 inc., 49 sc.

4 row: tie part sl-st.

Embroidered a buckle. For cargo I used pendants, bought in

needlework store. Sewn and glued with glue Moment Crystal.

She made a pattern of shorts and sewed them.

Finally, she dressed, fixed and sent her scuba diver to the seafarers to meet his dream, the Bul-Bul fish !!!

“Bul-fish” is connected by MK Marina Chuchkalova.

Thank you all for your attention! Natalia Grebinik tried very hard for you,

a simple aunt from a beautiful seaside town who has a friend

scuba diver !!!